|
MSO-2072E(A) |
MSO-
2074E(A) |
MSO-
2102E(A) |
MSO-2104E(A) |
MSO-2202E(A) |
MSO-2204E(A) |
| Channels |
2ch+Ext |
4ch |
2ch+Ext |
4ch |
2ch+Ext |
4ch |
| Bandwidth |
DC~70MHz |
DC~70MHz |
DC~100MHz |
DC~100MHz |
DC~200MHz |
DC~200MHz |
| (-3dB) |
(-3dB) |
(-3dB) |
(-3dB) |
(-3dB) |
(-3dB) |
| Rise time |
5ns |
5ns |
3.5ns |
3.5ns |
1.75ns |
1.75ns |
| Bandwidth Limit |
20MHz |
20MHz |
20MHz |
20MHz |
20M/100MHz |
20M/100MHz |
| Vertical Sensitivity |
| Resolution |
8 bit |
| :1mV~10V/div |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
1MΩ// 16pF approx. |
| DC Gain Accuracy |
±(3%)when 2mV/div or greater is selected |
| ? |
| ±(5%)when 1mV/div is selected; |
| Polarity |
Normal & Invert |
| Maximum Input Voltage |
300Vrms, CAT I |
| Offset Position Range |
1mV/div ~ 20mV/div : ±0.5V |
| 50mV/div ~ 200mV/div : ±5V |
| 500mV/div ~ 2V/div : ±25V |
| 5V~10V/div : ±250V |
| Waveform Signal Process |
+, -, ×, ÷, FFT, FFTrms ,User Defined Expression. |
| ? |
FFT:1Mpts
FFT:Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris. |
| Trigger |
| Source |
CH1 ,CH2, CH3, CH4, Line, EXT* |
| *dual channel models only |
| Trigger Mode |
Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence |
| Trigger Type |
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events), Time-Delay(Duration,4nS~10S), Bus |
| Holdoff range |
4ns~10s |
| Coupling |
AC,DC,LF rej. ,HF rej. ,Noise rej. |
| Sensitivity |
1div |
| External Trigger |
| Range |
±15V |
| Sensitivity |
DC ~ 100MHz Approx. 100mV |
| 100MHz ~ 200MHz Approx. 150mV |
| Input Impedance |
1MΩ±3%~16pF |
| Horizontal |
| Time base Range |
1ns/div ~ 100s/div (1-2-5 increments) |
| ROLL: 100ms/div ~ 100s/div |
| Pre-trigger |
10 div maximum |
| Post-trigger |
2,000,000 div maximum. |
| Time base Accuracy |
±50 ppm over any ≥ 1 ms time interval |
| Real Time Sample Rate |
Max.:1GSa/s (4ch model)
Per channel 1GSa/s (2ch model) |
| Record Length |
Max:10Mpts |
| Acquisition Mode |
Normal, Average, Peak Detect, Single |
| Peak Detection |
2ns (typical) |
| Average |
selectable from 2 to 256 |
| X-Y Mode |
| X-Axis Input |
Channel 1; Channel 3* |
| *four channel models only |
| Y-Axis Input |
Channel 2; Channel 4* |
| ? |
*four channel models only |
| Phase Shift |
±3° at 100kHz |
| Cursors and Measurement |
| Cursors |
Amplitude, Time, Gating available;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%) |
| Automatic Measurement |
36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase ,Cursor measurements |
| Control Panel Function |
| Auto counter |
6 digits, range from 2Hz minimum to the rated bandwidth |
| Autoset |
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset |
| Save Setup |
20set |
| Save Waveform |
24set |
| Display |
| TFT LCD Type |
8″ TFT LCD WVGA color display |
| Display Resolution |
800 horizontal × 480 vertical pixels (WVGA) |
| Interpolation |
Sin(x)/x |
| Waveform Display |
Dots, vectors, variable persistence (16ms~4s), infinite persistence |
| Waveform Update Rate |
120,000 waveforms per second, maximum |
| Display Graticule |
8 x 10 divisions |
| Display mode |
YT ;XY |
| Interface |
| USB Port |
USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 |
| Ethernet(LAN) Port |
RJ-45 connector, 10/100Mbps with HP Auto-MDIX |
| Go-NoGo BNC |
5V Max/10mA TTL open collector output |
| Kensington Style Lock |
Rear-panel security slot connects to standard Kensington-style lock. |
| Logic analyser specifications |
| Sample Rate |
Per Channel 1GSa/s |
| Bandwidth |
200MHz |
| Record Length |
Per Channel 10M pts (max) |
| Input Channels |
16 Digital (D15 – D0) |
| Trigger type |
Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus |
| Thresholds Quad |
D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds |
| Threshold selections |
TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined |
| User-defined Threshold Range |
±5V |
| Maximum Input Voltage |
±40 V |
| Minimum Voltage Swing |
±250 mV |
| Vertical Resolution |
1 bit |
| AWG Specifications (MSO-2000EA only) |
| Channels |
2 |
| Sample Rate |
200 Msa/s |
| Vertical Resolution |
14 bits |
| Max. Frequency |
25 MHz |
| Standard Waveform |
Sine, Square, Pulse, Ramp, DC, Noise |
| Built-in ARB Waveform |
Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac |
| Output Range |
20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω |
| Output Resolution |
1mV |
| Output Accuracy |
2% (1 kHz) |
| Offset Range |
±2.5 V, HighZ;±1.25 V, 50 Ω |
| Offset Resolution |
1mV |
| Sine |
| Frequency Range |
100mHz to 25MHz |
| Flatness |
±0.5 dB( relative to 1kHz) |
| Harmonic Distortion |
-40 dBc |
| Stray (Non-harmonic) |
-40 dBc |
| Total Harmonic Distortion |
1% |
| S/N Ratio |
40 dB |
| Square/Pulse |
| Frequency Range |
100mHz to 15MHz |
| Rise/Fall time |
<15ns |
| Overshoot |
<3% |
| Duty cycle |
Square:50%;Pulse:0.4%~99.6% |
| Min. Pulse Width |
30 ns |
| Jitter |
500 ps |
| Ramp |
| Frequency Range |
100mHz~1MHz |
| Linearity |
1% |
| Symmetry |
0 to 100% |
| Miscellaneous |
| Multi-language menu |
Available |
| operation environment |
Temperature: 0°C to 50°C. Relative Humidity ≤ 80% at 40°C or below; ≤ 45% at 41°C ~ 50°C. |
| On-line help |
Available |
| Time clock |
Time and Date ,Provide the Date/Time for saved data |
| Dimensions |
384mmX208mmX127.3mm |
| Weight |
3kg |
PL 
EN 
